Configuring Advanced Features
647
Parameters
Permitted Values
Default
Configures the IP address of the server from which the IP phone receives the action URI
requests.
For discontinuous IP addresses, multiple IP addresses are separated by commas.
For continuous IP addresses, the format likes *.*.*.* and the “*” stands for the values 0~255.
For example: 10.10.*.* stands for the IP addresses that range from 10.10.0.0 to
10.10.255.255.
If left blank, the IP phone will reject any HTTP GET request.
If it is set to “any”, the IP phone will accept and handle HTTP GET requests from any IP
address.
Example:
features.action_uri_limit_ip = 10.3.6.117, 10.3.6.119
Note
: It works only if the value of the parameter “features.action_uri.enable” is set to 1
(Enabled).
Web User Interface:
Features->Remote Control->Action URI Allow IP List
Phone User Interface:
None
To configure the trusted IP address(es) for action URI via web user interface:
1.
Click on
Features
->
Remote Control
.
2.
Enter the IP address or any in the
Action URI Allow IP List
field.
Multiple IP addresses are separated by commas. If you enter “any” in this field, the IP
phone can receive and handle GET requests from any IP address. If you leave the field
blank, the IP phone cannot receive or handle any HTTP GET request.
3.
Click
Confirm
to accept the change.
Summary of Contents for SIP-T19 E2 T4 Series
