Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 64 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
42
Details of Configuration Parameters:
Parameters Permitted Values Default
static.network.lldp.enable 0 or 1 1
Description:
Enables or disables the LLDP (Linker Layer Discovery Protocol) feature on the IP phone.
0
-Disabled
1
-Enabled, the IP phone will attempt to determine its VLAN ID through LLDP.
Note:
If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->LLDP->Active
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->LLDP->LLDP Status
static.network.lldp.packet_interval
Integer from 1 to
3600
60
Description:
Configures the interval (in seconds) for the IP phone to send the LLDP (Linker Layer
Discovery Protocol) request.
Note:
It works only if the value of the parameter “static.network.lldp.enable” is set to 1
(Enabled). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->LLDP->Packet Interval (1~3600s)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->LLDP->Packet Interval
To configure LLDP feature via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
LLDP
block, select the desired value from the pull-down list of
Active
.