Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 224 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
202
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
features.auto_linekeys.enable 0 or 1 0
Description:
Enables or disables the DSS keys to be assigned with Line type automatically.
0
-Disabled
1
-Enabled
Note:
The number of the DSS keys is determined by the value of the parameter
“account.X.number_of_linekey”. It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Features->General Information->Auto Linekeys
Phone User Interface:
None
account.X.number_of_linekey
[1]
Integer
from 1 to
999
1
Description:
Configures the number of DSS keys to be assigned with Line type automatically from the
first unused one (unused one means the DSS key is configured as N/A or Line). If a DSS key
is used, the IP phone will skip to the next unused DSS key.
The order of DSS key assigned automatically is Line Key->Ext Key.
Example:
account.1.number_of_linekey = 1
Note
: It works only if the value of the parameter “features.auto_linekeys.enable” is set to 1
(Enabled). To assign Ext Key, make sure the expansion module has been connected to the
phone in advance. It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Account->Advanced->Number of line key
Phone User Interface:
None
account.X.auto_label.enable
[1]
0 or 1 0
Description:
Enables or disables the Auto Label feature. It is only applicable to the automatically assigned
line DSS keys.