Setting Up Your System
71
Parameters
Permitted Values
Default
Description:
Configures the port of the STUN (Simple Traversal of UDP over NATs) server.
Example:
sip.nat_stun.port = 3478
Note:
It works only if the value of the parameter “static.sip.nat_stun.enable” is set to 1
(Enabled). If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->NAT->STUN->STUN Port (1024~65000)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->NAT->STUN Port
account.X.nat.nat_traversal
[1]
0, 1 or 2
0
Description:
Enables or disables the NAT traversal for a specific account.
0
-Disabled
1
-STUN,
it works only if the value of the parameter “static.sip.nat_stun.enable” is set to 1
(Enabled).
2
-Manual NAT, it works only if the value of the parameter “network.static_nat.enable” is set
to 1 (Enabled).
Web User Interface:
Account->Register->NAT
Phone User Interface:
Menu->Advanced (default password: admin) ->Accounts->NAT Status
Note
: Manual NAT cannot be configured via phone user interface.
static.network.static_nat.enable
0 or 1
0
Description:
Enables or disables the manual NAT feature on the IP phone.
0
-Disabled
1
-Enabled
Note
:
If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->NAT->Nat Manual->Active
Summary of Contents for SIP-T19 E2 T4 Series
