Configuring Basic Features
385
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
sip.use_out_bound_in_dialog
0 or 1
1
Description:
Enables or disables the IP phone to send all SIP requests to the outbound proxy server
forcibly in a dialog.
0
-Disabled, only the new SIP request messages from the IP phone will be sent to the
outbound proxy server in a dialog.
1
-Enabled, all the SIP request messages from the IP phone will be forced to send to the
outbound proxy server in a dialog.
Note
: It works only if the value of the parameter “account.X.outbound_proxy_enable” is set
to 1 (Enabled) and the outbound server address has been correctly configured on the phone.
Web User Interface:
Features->General Information->Use Outbound Proxy In Dialog
Phone User Interface:
None
To configure use outbound proxy in dialog via web user interface:
1.
Click on
Features
->
General Information
.
2.
Select the desired value from the pull-down list of
Use
Outbound
Proxy
In
Dialog
.
3.
Click
Confirm
to accept the change.
Summary of Contents for SIP-T19 E2 T4 Series
