Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 372 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
350
4. Press the
Save
soft key to accept the change.
IP Direct Auto Answer
IP direct auto answer allows IP phones to automatically answer an IP call. IP direct auto answer
works only if allow IP call is enabled. For more information on allow IP call, refer to
Allow IP Call
on page 351 .
Procedure
IP direct auto answer can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure IP direct auto answer
feature.
Parameter:
features.ip_call.auto_answer.enable
Web User Interface
Configure IP direct auto answer
feature.
Navigate to
:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Details of Configuration Parameter:
Parameter Permitted Values Default
features.ip_call.auto_answer.enable 0 or 1 0
Description:
Enables or disables the auto answer feature for IP call.
0
-Disabled
1
-Enabled, the IP phone can automatically answer an IP call.
Note
: It works only if the value of the parameter “features.direct_ip_call_enable” is set to 1
(Enabled). The IP phone cannot automatically answer the incoming IP call when the IP hone
is in a call or dialing even if IP call auto answer is enabled.
Web User Interface:
Features->General Information->IP Direct Auto Answer
Phone User Interface:
None
To configure IP direct auto answer via web user interface:
1.
Click on
Features
->
General Information
.