Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 284 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
262
Details of Configuration Parameters:
Parameters Permitted Values Default
features.key_as_send 0, 1 or 2 1
Description:
Configures the "#" or "*" key as the send key.
0
-Disabled, neither “#” nor “*” can be used as the send key.
1
-# key, the pound key is used as the send key.
2
-* key, the asterisk key is used as the send key.
Web User Interface:
Features->General Information->Key As Send
Phone User Interface:
Menu->Features->Others->General->Key As Send
features.send_pound_key 0 or 1 0
Description:
Enables or disables the IP phone to dial out “##” when the user only presses the # key on
dialing screen or pre-dialing screen.
0
-Disabled, the IP phone will dial out “#” when the user presses the # key for the second
time.
1
-Enabled, the IP phone will dial out “##” when the user presses the # key for the third time.
Note
: It works only if the value of the parameter “features.key_as_send” is set to 1 (# key).
Web User Interface:
Features->General Information->Send Pound Key
Phone User Interface:
None
To configure a send key via web user interface:
1.
Click on
Features
->
General Information
.