Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 677 / 981

Configuring Advanced Features
655
Parameters Permitted Values Default
Phone User Interface:
None
account.X.sip_server.Y.retry_counts
[1]
(Y ranges from 1 to 2)
Integer from 0 to
20
3
Description:
Configures the retry times for the IP phone to resend requests when the SIP server Y is
unavailable or there is no response from the SIP server Y for a specific account.
Example:
account.1.sip_server.1.retry_counts= 3
The IP phone moves to the next available server after three failed attempts.
Web User Interface:
Account->Register->SIP Server Y->Server Retry Counts
Phone User Interface:
None
account.X.sip_server.Y.register_on_enable
[1]
(Y ranges from 1 to 2)
0 or 1 0
Description:
Enables or disables the IP phone to register to the secondary server before sending requests
to it for a specific account when encountering a failover.
0
-Disabled, the IP phone won’t attempt to register to the secondary server, since the phone
assumes that the primary and secondary servers share registration information. So the IP
phone will directly send the requests to the secondary server.
1
-Enabled, the IP phone will register to the secondary server first, and then send the
requests to it.
Web User Interface:
None
Phone User Interface:
None
account.X.sip_server.Y.only_signal_with_registered
[1]
(Y ranges from 1 to 2)
0 or 1 0
Description:
Enables or disables the IP phone to only send requests to the registered server for a specific
account when encountering a failover.
0
-Disabled