manualshive.com logo in svg

Xilinx Virtex-5 FPGA ML561, User Manual

The Xilinx Virtex-5 FPGA ML561 offers outstanding performance and versatility for advanced electronic designs. For convenient usage, a comprehensive User Manual is available for free download at manualshive.com. This manual provides detailed instructions and valuable insights, ensuring seamless integration and successful implementation of this cutting-edge product.

Share
Download
background image

Virtex-5 FPGA User Guide

www.xilinx.com

325

UG190 (v5.0) June 19, 2009

Input/Output Delay Element (IODELAY)

Input/Output Delay Element (IODELAY)

Every I/O block contains a programmable absolute delay element called IODELAY. The 
IODELAY can be connected to an ILOGIC/ISERDES or OLOGIC/OSERDES block or both. 
IODELAY is a 64-tap, wraparound, delay element with a calibrated tap resolution. See the 

Virtex-5 FPGA Data Sheet

. It can be applied to the combinatorial input path, registered 

input path, combinatorial output path, or registered output path. It can also be accessed 
directly in the fabric. IODELAY allows incoming signals to be delayed on an individual 
basis. The tap delay resolution is varied by selecting an IDELAYCTRL reference clock from 
the range specified in the 

Virtex-5 FPGA Data Sheet

. The IODELAY resource can function as 

IDELAY, ODELAY, or bidirectional delay.

When used as IDELAY, the data input comes from either IBUF or the fabric and the output 
goes to ILOGIC/ISERDES. There are three modes of operation available:

•

Zero-hold time delay mode (IDELAY_TYPE = DEFAULT)

This mode of operation allows backward compatibility for designs using the zero-hold 
time delay feature in Virtex-II, Virtex-II Pro and Virtex-4 devices. This delay element is 
used to provide non-positive hold times when global clocks are used without DCMs to 
capture data (pin-to-pin parameters). When used in this mode, the IDELAYCTRL 
primitive does not need to be instantiated. See 

IDELAYCTRL Usage and Design 

Guidelines

 for more details.

•

Fixed delay mode (IDELAY_TYPE = FIXED)

In the fixed delay mode, the delay value is preset at configuration to the tap number 
determined by the attribute IDELAY_VALUE. Once configured, this value cannot be 
changed. When used in this mode, the IDELAYCTRL primitive must be instantiated. 
See 

IDELAYCTRL Usage and Design Guidelines

 for more details. 

•

Variable delay mode (IDELAY_TYPE = VARIABLE)

In the variable delay mode, the delay value can be changed after configuration by 
manipulating the control signals CE and INC. When used in this mode, the 
IDELAYCTRL primitive must be instantiated. See 

IDELAYCTRL Usage and Design 

Guidelines

 for more details.

When used as ODELAY, the data input comes from OLOGIC/OSERDES and the data 
output goes to OBUF. There is a single mode of operation:

•

Fixed delay output mode

In the fixed delay output mode, the delay value is preset at configuration to the tap 
number determined by the attribute ODELAY_VALUE. Once configured, this value 
cannot be changed. When used in this mode, the IDELAYCTRL primitive must be 
instantiated. See 

IDELAYCTRL Usage and Design Guidelines

 for more details.

When used as bidirectional delay, the IOB is configured in bidirectional mode. IODELAY 
alternately delays the data on the input path and output path. There are two modes of 
operation:

•

Fixed IDELAY (IDELAY_TYPE = FIXED) and fixed ODELAY mode

In this mode, both the values for IDELAY and ODELAY are preset at configuration and 
are determined by the IDELAY_VALUE and ODELAY_VALUE attributes. Once 
configured, this value cannot be changed. When used in this mode, the IDELAYCTRL 
primitive must be instantiated. See 

IDELAYCTRL Usage and Design Guidelines

 for 

more details.

Summary of Contents for Virtex-5 FPGA ML561


































































































































































































































































































































































































Reviews:

No comments

Related manuals for Virtex-5 FPGA ML561

Safety Vision ROADRECORDER 8000 User Manual preview
ROADRECORDER 8000
Brand: Safety Vision Pages: 40
X-Micro XWL-11GPRG Quick Start Manual preview
XWL-11GPRG
Brand: X-Micro Pages: 9
X-Micro XWL-11GPAG Quick Installation Manual preview
XWL-11GPAG
Brand: X-Micro Pages: 19
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Brand: Paradyne Pages: 112
Vivotek NR8401 User Manual preview
NR8401
Brand: Vivotek Pages: 136
Queclink GV600 Series Instruction Manual preview
GV600 Series
Brand: Queclink Pages: 9
mikroElektronika CAN SPI click Quick Start Manual preview
CAN SPI click
Brand: mikroElektronika Pages: 3
Accusys ACS-76500 Owner'S Manual preview
ACS-76500
Brand: Accusys Pages: 34
RuggedCom RUGGEDMAX WIN7000 Installation Manual preview
RUGGEDMAX WIN7000
Brand: RuggedCom Pages: 42
Wintech TDS510USB Plus Installation Manual preview
TDS510USB Plus
Brand: Wintech Pages: 21
Nvidia DGX A100 User Manual preview
DGX A100
Brand: Nvidia Pages: 115
ebm-papst R3G175-AF01-02 Operating Instructions Manual preview
R3G175-AF01-02
Brand: ebm-papst Pages: 11
NXP Semiconductors UM10301 PCA8565 User Manual preview
UM10301 PCA8565
Brand: NXP Semiconductors Pages: 54
Lattice Semiconductor iCE40 SPRAM Series Technical Note preview
iCE40 SPRAM Series
Brand: Lattice Semiconductor Pages: 12
ENERMAX LIQMAX III ELC-LMT120-ARGB User Manual preview
LIQMAX III ELC-LMT120-ARGB
Brand: ENERMAX Pages: 32
Alesis QuadraVerb 2 Setting Up preview
QuadraVerb 2
Brand: Alesis Pages: 11
NXP Semiconductors MSC8113 Reference Manual preview
MSC8113
Brand: NXP Semiconductors Pages: 1202
Apogee X-FireWire Card Owner'S Manual preview
X-FireWire Card
Brand: Apogee Pages: 32

Brands by name

Popular brands

Load more brands