manualshive.com logo in svg

Xilinx Virtex-5 FPGA ML561, User Manual

The Xilinx Virtex-5 FPGA ML561 offers outstanding performance and versatility for advanced electronic designs. For convenient usage, a comprehensive User Manual is available for free download at manualshive.com. This manual provides detailed instructions and valuable insights, ensuring seamless integration and successful implementation of this cutting-edge product.

Share
Download
background image

178

www.xilinx.com

Virtex-5 FPGA User Guide

UG190 (v5.0) June 19, 2009

Chapter 5:

Configurable Logic Blocks (CLBs)

Look-Up Table (LUT)

The function generators in Virtex-5 FPGAs are implemented as six-input look-up tables 
(LUTs). There are six independent inputs (A inputs - A1 to A6) and two independent 
outputs (O5 and O6) for each of the four function generators in a slice (A, B, C, and D). The 
function generators can implement any arbitrarily defined six-input Boolean function. 
Each function generator can also implement two arbitrarily defined five-input Boolean 
functions, as long as these two functions share common inputs. Only the O6 output of the 
function generator is used when a six-input function is implemented. Both O5 and O6 are 
used for each of the five-input function generators implemented. In this case, A6 is driven 
High by the software. The propagation delay through a LUT is independent of the function 
implemented, or whether one six-input or two five-input generators are implemented. 
Signals from the function generators can exit the slice (through A, B, C, D output for O6 or 
AMUX, BMUX, CMUX, DMUX output for O5), enter the XOR dedicated gate from an O6 
output (see 

“Fast Lookahead Carry Logic”

), enter the carry-logic chain from an O5 output 

(see 

“Fast Lookahead Carry Logic”

), enter the select line of the carry-logic multiplexer 

from O6 output (see 

“Fast Lookahead Carry Logic”

), feed the D input of the storage 

element, or go to F7AMUX/F7BMUX from O6 output.

In addition to the basic LUTs, slices contain three multiplexers (F7AMUX, F7BMUX, and 
F8MUX). These multiplexers are used to combine up to four function generators to provide 
any function of seven or eight inputs in a slice. F7AMUX and F7BMUX are used to 
generate seven input functions from LUTs A and B, or C and D, while F8MUX is used to 
combine all slices to generate eight input functions. Functions with more than eight inputs 
can be implemented using multiple slices. There are no direct connections between slices 
to form function generators greater than eight inputs within a CLB or between slices.

Storage Elements

The storage elements in a slice can be configured as either edge-triggered D-type flip-flops 
or level-sensitive latches. The D input can be driven directly by a LUT output via 
AFFMUX, BFFMUX, CFFMUX or DFFMUX, or by the BYPASS slice inputs bypassing the 
function generators via AX, BX, CX, or DX input. When configured as a latch, the latch is 
transparent when the CLK is Low.

The control signals clock (CK), clock enable (CE), set/reset (SR), and reverse (REV) are 
common to all storage elements in one slice. When one flip-flop in a slice has SR or CE 
enabled, the other flip-flops used in the slice will also have SR or CE enabled by the 
common signal. Only the CLK signal has independent polarity. Any inverter placed on the 
clock signal is automatically absorbed. The CE, SR, and REV signals are active High. All 
flip-flop and latch primitives have CE and non-CE versions.

The SR signal forces the storage element into the state specified by the attribute SRHIGH or 
SRLOW. SRHIGH forces a logic High at the storage element output when SR is asserted, 
while SRLOW forces a logic Low at the storage element output. When SR is used, an 
optional second input (DX) forces the storage element output into the opposite state via the 
REV pin. The reset condition is predominant over the set condition (see 

Figure 5-5

). 

Table 5-3

 and 

Table 5-4

 provide truth tables for SR and REV depending on whether 

SRLOW or SRHIGH is used.

Table 5-3:

Truth Table when SRLOW is Used (Default Condition)

SR

REV

Function

0

0

No Logic Change

0

1

1

Summary of Contents for Virtex-5 FPGA ML561


































































































































































































































































































































































































Reviews:

No comments

Related manuals for Virtex-5 FPGA ML561

ABB RELION REF615R Manual preview
RELION REF615R
Brand: ABB Pages: 66
Maco Standard Fitting Instructions Manual preview
Standard
Brand: Maco Pages: 38
Data Translation DT300 Series Getting Started Manual preview
DT300 Series
Brand: Data Translation Pages: 98
Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
Palm M505 Setting Up preview
M505
Brand: Palm Pages: 4
PaloAlto Networks PA-5400 Series Quick Start Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 2
IEI Technology HPE-4S1 Quick Installation Manual preview
HPE-4S1
Brand: IEI Technology Pages: 3
hawa HAWA-Frontside 60/B Planning And Installation Instructions preview
HAWA-Frontside 60/B
Brand: hawa Pages: 28
Orban OPTIMOD 6300 Operating Manual preview
OPTIMOD 6300
Brand: Orban Pages: 255
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
pivotal COMMWARE ECHO 5G How To Set Up preview
COMMWARE ECHO 5G
Brand: pivotal Pages: 2
Bridgeworks Oresund EFC102200 User Manual preview
Oresund EFC102200
Brand: Bridgeworks Pages: 84
Xantech CC12 Installation Instructions preview
CC12
Brand: Xantech Pages: 4
ZALMAN CNPS20X User Manual preview
CNPS20X
Brand: ZALMAN Pages: 20
Renesas RH850 Series User Manual preview
RH850 Series
Brand: Renesas Pages: 67
TDK HHM Series HHM1521 Specifications preview
HHM Series HHM1521
Brand: TDK Pages: 2
Proxim 68568r1 Installation And Management Manual preview
68568r1
Brand: Proxim Pages: 65
Renesas PCA7755D User Manual preview
PCA7755D
Brand: Renesas Pages: 6

Brands by name

Popular brands

Load more brands