Loading Paper
Xerox WorkCentre C226 User Guide
1-35
3.
When the loaded paper size appears in the display (if you loaded an INCH-based
size such as 8-1/2" x 11"), touch the size key to highlight it, and then touch the
[OK] key to complete the procedure.
4.
If an irregular size of paper was loaded after the [EXTRA] key was touched, touch
the
key in the screen of step 2 to display the following screen.
When the screen opens the X key will be highlighted. Use the and touch keys to
enter the X dimension. Next touch the Y key to highlight it and enter the
dimensions for Y.
The permitted range for the X dimension is 139 to 432 mm (5-1/2 to 17 inches),
and the permitted range for the Y dimension is 182 to 297 mm (7-1/4 to 11-3/4
inches).
When both have been entered, touch the [OK] to complete the operation.
Setting the paper type and paper size in the Bypass Tray
Follow the steps below to set the type and size of the paper loaded in the Bypass Tray.
1.
For copy mode or printer mode, touch the appropriate key.
(When copy mode is selected)
Touch the [More...] key in the Paper Select display of the
main screen of copy mode.
(When printer mode is selected)
Touch the [PAPER SELECT] key in the main screen of
printer mode.
X
Y
139
182
(139 432)
mm
(182 297)
mm
Paper Select
A4
Condition
Settings
Summary of Contents for WorkCentre C226
