![background image](http://html2.mh-extra.com/html/xerox/workcentre-c226/workcentre-c226_user-manual_4284544109.webp)
Setting Originals
Xerox WorkCentre C226 User Guide
2-5
2.
Place the originals face up in the DADF tray.
Set the originals all the way into the feed slot. Do not
exceed the maximum height line marked on the original
guide.
When using the document glass
Open the document cover, place the original face down on the document glass, and
then gently close the document cover.
NOTES:
•
Do not place any objects under the original size detector, because they may
damage it or the original size may not be detected properly.
•
If an original has been placed in the DADF tray of the DADF, remove it. Otherwise
the original in the DADF tray will be scanned instead of the original on the
document glass.
[ How to place the original ]
Place the original in the appropriate position shown below according to its size. (Cen-
tre the original on the centring scale.)
Original size detector
R
R
B4 or
8½x14
A3 or 11x17
A4 or 8½x11
A4 or
8½x11
A5 or
5½x8½
Original scale
Centring scale
Centring scale
Original scale
Summary of Contents for WorkCentre C226
