Xerox WorkCentre C226, User Manual

Page: 334 / 440

5-6 Xerox WorkCentre C226 User Guide
Fax Unit
[BLACK COPY
START]
Press to begin scanning an original for fax transmission.
[CLEAR ALL] Use to cancel a transmission or programming operation. When this key is pressed, the
operation is cancelled and you return to the initial screen described on the page 5-6.
This key is also used to cancel a resolution, paper size, or special function setting that
was selected when sending a fax.
NOTE: For the names and functions of the parts of the machine, see page 1-14.
Fax Mode (Condition Settings Screen)
The condition settings screen of fax mode is displayed by pressing the [IMAGE SEND]
key while the print mode, copy mode, or job status screen appears in the touch panel.
In the explanations that follow, it is assumed that the initial screen that appears after
pressing the [IMAGE SEND] key is the condition settings screen (page 5-7). If you
have set the display to show the address directory screen (page 5-9) when the
[IMAGE SEND] key is pressed, touch the [CONDITION SETTINGS] key in the
address directory screen to display the condition settings screen.
“Default display settings” in the “Fax Unit” section of the WorkCentre C226 System
Administration Guide can be used to select whether the condition settings screen
appears or the address directory screen appears as the initial screen when the
[IMAGE SEND] key is pressed.
NOTE: When the network scanner option is installed, you will return to the initial screen of fax
mode or scanner mode, whichever mode was selected last. (Pressing the [IMAGE
SEND] key in a copy screen or printer screen returns you to the initial screen of fax
mode.)
8
9