Xerox WorkCentre C226, User Manual

Page: 148 / 440

2-44 Xerox WorkCentre C226 User Guide
Copier Operation
4. Ensure that A4 (8-1/2" x 11") size paper is selected.
If A4 (8-1/2" x 11") size paper is not selected, touch the
appropriate key in the Paper Select display to select A4 (8-
1/2" x 11") size paper.
About the steps that follow
For two-sided copying, follow steps 2 through 4 beginning on page 2-24 and then fol-
low steps 4 through 7 beginning on page 2-23.
For one-sided copying, follow steps 4 through 7 beginning on page 2-23.
To cancel the dual page copy function, touch the [DUAL PAGE COPY] key on the spe-
cial modes screen (step 1). (The highlighted display will be cancelled.)
NOTE: To erase shadows caused by document binding, use the edge erase function (page 2-
41). (Centre Erase and Edge + Centre Erase cannot be used in combination.)
Centring
When the original and copy paper are of different sizes, CENTRING is used to shift the
image to the centre of the copy paper but only in the left to right direction.
1. Touch the [CENTRING] key on the SPECIAL MODES screen.
The [CENTRING] key is highlighted to indicate that the
function is turned on, and the centring icon ( ) will
appear in the upper left of the screen.
2. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
Original Copy
• This function can be used to reduce a larger sized origi-
nal image and centre it on a copy of smaller paper size,
as well as centre a smaller original onto a larger sized
copy.
• This function will not work when non-standard size origi-
nals or copy paper are used. This function cannot be
selected when enlargement copying has been selected.
[Example]
Margin Shift
Centring