Xerox WorkCentre C226, User Manual

Page: 379 / 440

Transmission Between Machines Supporting F-codes
Xerox WorkCentre C226 User Guide 5-51
Entering (Dialing) a Fax Number with a
Sub-Address and Passcode
When transmitting to a memory box in another fax machine, the sub-address and
passcode must be entered after the other machine's fax number. Enter the other
machine's fax number as explained for a normal transmission or for a polling operation
(see “Using the Polling Function” on page 5-36), and then enter the sub-address and
passcode as follows:
1. Dial the fax number of the other machine, or touch a one-touch key.
If the condition settings screen appears, touch the
[ADDRESS DIRECTORY] key to display the address
directory screen.
If the sub-address and passcode have been pro-
grammed into the one-touch key, the following steps are
not needed.
2. Touch the [SUB ADDRESS] key.
When the [SUB ADDRESS] key is touched, a slash "/"
appears at the end of the fax number. If you make a mis-
take, press the [C] key to clear the mistake.
3. Use the numeric keys to enter the sub-address of the other machine's memory
box (max. 20 digits).
If you make a mistake, press the [C] key and re-enter the
correct digit(s).
4.Touch the [SUB ADDRESS] key once again.
A slash "/" appears at the end of the sub-address.
5.Use the numeric keys to enter the passcode of the
other machine's memory box (max. 20 digits)
If a passcode has not been established for the other box, this step is not
necessary.
NOTES: • You can program a sub-address and passcode into a one-touch key along with the
fax number (see “Storing One-Touch Keys” on page 5-68).
• Manual transmission (on-hook dialing) using a sub-address and Passcode Is Not
Possible.
Corpo.Tps
Xerox Group
Spe
Condition
Settings
Sub Address
Address Review