Xerox WorkCentre C226 User Manual Download

Page: 74 / 440

1-48

Xerox WorkCentre C226 User Guide

General Information

If misfed paper is not found in step 2, pull out Paper Tray 1 and remove the misfed
paper.

Be careful not to tear the misfed paper during removal.

Gently close the paper tray.

Push the tray firmly all the way into the machine.

Gently close the upper side cover.

After closing, confirm that the misfeed message has
been cleared and the normal display appears.

Misfeed in the Bypass Tray

Remove the misfed paper from the Bypass Tray.

Be careful not to tear the misfed paper during removal.

After removing the misfed paper, open and close the Duplex Bypass/Inverter Unit
to reset.

Grasp the finger hold and gently open the unit.

Summary of Contents for WorkCentre C226

























































































































































































































































































































































































































































Search results

Summary of Contents for WorkCentre C226

Reviews:

Related manuals for WorkCentre C226

Brands by name

Popular brands

Xerox WorkCentre C226, User Manual

Search results

Summary of Contents for WorkCentre C226

Reviews:

Related manuals for WorkCentre C226

Brands by name

Popular brands