Xerox WorkCentre C226 User Manual Download Page 427

Page: 427 / 440

When an Alarm Sounds and a Warning Message Is Displayed

Xerox WorkCentre C226 User Guide

5-99

Manual reception was
not possible because
there was not enough
free space in memory.

Try manual recep-
tion again after
currently stored
jobs have been
completed.

The indicated cover is
open.

Close the indi-
cated cover.

The self-diagnosis func-
tion has activated and
automatically stopped
operation. An error code
appears in xx-xx.

Turn off the power
and then turn it
back on. If the
same message
still appears, con-
tact your dealer.

Message screen (Alarm)

Meaning of message

Action

Page/Guide

MANUAL RECEIVE IS DISABLED.
DUE TO OUT OF MEMORY.

CLOSE THE xxxx COVER.

CLOSE THE DADF.

CLOSE THE LOWER RIGHT SIDE COVER.

CALL FOR SERVICE. CODE:xx-xx
FAX FUNCTION TROUBLE.

Summary of Contents for WorkCentre C226

























































































































































































































































































































































































































































Search results

Summary of Contents for WorkCentre C226

Reviews:

Related manuals for WorkCentre C226

Brands by name

Popular brands

Xerox WorkCentre C226, User Manual

Search results

Summary of Contents for WorkCentre C226

Reviews:

Related manuals for WorkCentre C226

Brands by name

Popular brands