Xerox WorkCentre C226, User Manual

Page: 53 / 440

Loading Paper
Xerox WorkCentre C226 User Guide 1-27
Printing onto envelopes
• Attempting to print on envelopes that have metal clasps, plastic snaps, string clo-
sures, windows, linings, self-adhesive patches or synthetic materials may cause
misfeeds, inadequate toner adherence or other trouble.
• Envelopes with embossed surfaces may cause the prints to become smudged.
• Use only envelopes which are flat and crisply folded. Curled or poorly formed
envelopes may be poorly printed or may cause misfeeds.
• Print quality is not guaranteed in the area 10
mm or 13/32" from the edges of the enve-
lope.
• Print quality is not guaranteed on parts of
envelopes where there is a large step-like
change of thickness, such as on three-layer
or four-layer envelopes.
• Print quality is not guaranteed on envelopes
having peel off flaps for sealing the enve-
lopes.
Fusing unit pressure adjusting levers
In some cases damage to the envelopes, colour deviations, or smudging may occur
even if envelopes within the specifications are used. This problem may be reduced by
shifting the fusing unit pressure adjusting levers from their normal pressure position to
the lower pressure position. Follow the procedure on page 1-28.)
NOTE: Be sure to return the lever to the normal position when you have finished feeding
envelopes. If not, inadequate toner adherence, paper misfeeds or other trouble may
occur.
1. Unlatch the Duplex Bypass/Inverter Unit and slide it to the left.
Unlatch the unit and gently move it away from the
machine. If the machine is not equipped with a Duplex
Bypass/Inverter Unit, open the side cover similarly.
Can be used
Cannot be used