Xerox WorkCentre C226, User Manual

Page: 84 / 440

1-58 Xerox WorkCentre C226 User Guide
General Information
Paper misfeeds
frequently.
Is paper other than Xerox-recommended
paper being used? Use Xerox-recommended paper.
Paper curled or damp?
Do not use curled or crimped paper. If
you do not use paper for a long time,
store paper in the wrapper in a dry loca-
tion.
Is the paper curled and does it frequently
misfeed in the Duplex Module/2-Tray Unit
or Saddle Stitch Finisher? Paper may be curled when output
depending on the paper type and quality.
In some cases turning the paper over in
the tray will reduce misfeeding due to
curling.
Multiple sheets of paper fed simulta-
neously?
Remove the paper from the paper tray or
the Bypass Tray, fan the paper as shown
in the illustration, and then load it again.
Printed paper is
wrinkled or the
image rubs off
easily.
Is paper other than Xerox-recommended
paper being used?
Use Xerox-recommended paper.
Is paper size or weight out of the allow-
able range?
Use paper in the allowable range.
Do wrinkles appear when printing enve-
lopes?
Moving the pressure adjusting levers of
the fusing unit from the normal position to
a weaker pressure position may help alle-
viate this problem. (page 1-27)
Is the pressure adjustment lever of the
fusing unit out of position? Return the pressure adjusting levers of
the fusing unit to the normal position.
(page 1-28)
Paper damp?
Be sure to store paper in the wrapper in a
dry location and do not store paper in a
location that is humid at a high tempera-
ture or an extremely low temperature.
The contrast on
the touch panel is
too high or too low.
Is LCD contrast properly adjusted?
Adjust the contrast using "DISPLAY
CONTRAST" of custom settings.
(page 1-37)
Problem Check Solution or cause