Xerox WorkCentre C226, User Manual

Page: 362 / 440

5-34 Xerox WorkCentre C226 User Guide
Fax Unit
6. Perform the desired transmission operation.
The steps that follow will depend on the type of transmission. The following
operations can be performed in a timer transmission:
• Normal transmission
• Broadcast transmission
• Polling
• Serial polling
• F-code polling
• F-code confidential transmission
• F-code relay request transmission
NOTES: • Other operations can be performed after a timer transmission is set up. If another
operation is in progress when the specified time arrives, the timer transmission will
begin when the job in progress is completed.
• If a timer transmission job is given priority in the fax job status screen (see “Priority
Transmission of a Stored Job” on page 5-26), the time setting will be cancelled
and the job performed as soon as the current job is completed.
Transmission and Reception Using the Polling Function
This function can only be used if the other machine is a Super G3 or G3 machine and
supports the polling function. The polling function allows your machine to call a fax
machine that has document data set and initiate reception of the document. You can
also perform the reverse operation: scan a document into the memory of your machine
so that another machine can call your machine and initiate reception of the document.
This function whereby your machine calls the sending machine and asks the sending
machine to begin transmission of a loaded document is called the polling function.
Scanning a document into memory and automatically sending it when the receiving
machine calls and "polls" your machine is called polling memory.
NOTE: For information on polling and polling memory using F-codes, refer to “F-Code Polling
Memory” on page 5-52. This section only explains normal polling and normal polling
memory.