Setting the Printer Drivers
Xerox WorkCentre C226 User Guide
3-9
5.
If you need to adjust the colour image quality and/or the black and white image
quality (print contrast), perform the following step. If you do not need to adjust the
image quality, go directly to step 6.
To adjust the colour image quality and/or black and white image quality (print
contrast), click the [Color Adjustment] button. The following screen will appear.
Use the [Color Balance] field to adjust the saturation of colour images, and
strengthen or weaken the RGB (red, green, and blue) colour components.
Use the [Image] field to adjust the brightness and contrast of both colour and black
and white images (page 3-38).
When finished, go to step 6.
6.
Click the [Paper] tab.
Make sure that the paper size is correct. Next, configure the "Paper Selection"
settings. "Auto Select" is normally used for both "Paper Source" and "Paper Type".
When you have completed the settings, click the [OK] button to close the printer
properties window.
NOTE:
Using the Bypass Tray
When the paper source is set to the Bypass Tray, be sure to set the paper size and
paper type on the machine's operation panel. This procedure is explained on page 1-
23.
Summary of Contents for WorkCentre C226
