Xerox WorkCentre C226, User Manual, Page: 290 / 440

4-34 Xerox WorkCentre C226 User Guide
Network Scanner Operation
Scanning Settings
When sending an image, you can adjust the original size, exposure, resolution, and
file format settings as needed.
Manually Setting the Scanning Size
If you load an original that is not a standard size (such as an inch size), or if you wish
to change the scanning size, touch the [ORIGINAL] key and set the original size man-
ually.
Perform the following steps after loading the document in the DADF or on the docu-
ment glass.
NOTE: Standard sizes that can be detected are as follows:
A3, B4, A4, A4R, B5, B5R, A5. (11"x17", 8-1/2"x14", 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-
1/2")
If a non-standard size original is loaded (including special sizes), the closest standard
size may be displayed, or the original size may not appear at all.
1. Touch the [ORIGINAL] key.
2. Touch the [MANUAL] key.
The sizes that can be selected are displayed.
[AUTO] is no longer highlighted. [MANUAL] is high-
lighted.
NOTE: If you wish to rotate the original 90° when creating an image file, click the "ROTATE
THE IMAGE 90 DEGREES" checkbox (a checkmark should appear in the box).
Auto A4
Original
Lower
Resolution
Programmed
File Format
Manual uto
1-Sided
O
2-Sided
Booklet
Rotate The Image 90 Degrees
2-Sid
Table
Original Size