Xerox WORKCENTRE 5790 User Manual Download Page 145

Page: 145 / 328

Scan to Home

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Workflow Scanning

145

Scan to Home

Scan to Home

allows you to scan hard copy originals at the WorkCentre™

5735/5740/5745/5755/5765/5775/5790 and send them to a destination on the network which is
specified as your "Home" destination.

You enter your Network Authentication log
in at the device. The device displays one

Scan to Home

template. When you scan a

document the authentication server
provides the information as to who is
logged in at the device.

The

Workflow Scanning

option needs to be

installed before this feature can be used
but it is NOT necessary for the

Workflow

Scanning

repositories and templates to be

configured.

Your System Administrator enables the

Scan to Home

option in

Internet Services

. Your System

Administrator also needs to enable Network Authentication for this feature to be available.

Lightweight Directory Application Protocol (LDAP)

connectivity may also be used.

Using Scan to Home

The

Scan to Home

option must be enabled and set up by the System Administrator in order for the

Scan to Home

template to be available on the device. You must also be logged in on the device using

Network Authentication to use this option.

Load the original documents in the

document feeder

or on the

document glass

Press the

Clear All

(AC) button twice and then

Confirm

to cancel any previous screen programing

selections.

To log in select the

Log In/Out

button on the control panel.

Use the keyboard to enter your

User Name

, then select the

Next

button.

Use the keyboard to enter your

Password

, then select the

Enter

button.

Press the

Services Home

button and select the

Workflow Scanning

option.

The

Workflow Scanning

features are displayed.

Select the

Scan To Home

template from the Template

Destination list.

Summary of Contents for WORKCENTRE 5790









































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands

Xerox WORKCENTRE 5790, User Manual

Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands