Xerox WORKCENTRE 5790 User Manual Download Page 141

Page: 141 / 328

Creating Templates

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Workflow Scanning

141

Filing Options

These options are used to specify the document name and file format used to store the scanned
images. The following options are available:

•

Document Name

enables you to name the file that will be stored.

•

File Format

determines the type of file created and can be temporarily changed for the current

job.

Report Options

These options are used to enable the confirmation sheet and job log.

•

Confirmation Sheet

provides information about the success of the scanning job and prints at the

device when the job has completed.

•

Job Log

allows you to print a list of the last jobs that the system has completed processing.

Workflow Scanning Image Settings

These settings are used to set the image optimization, the searchable options and the compression
settings. The following options are available:

•

Optimized for Fast Web Viewing

these options are used to set the device to optimize the image

file for viewing on a website.

•

Searchable Options

are used to select if the file content is searchable, and the language options

required.

•

Text Compression

allows you to enable the text to be compressed if the file format output is PDF

or PDF/A.

Compression Capability

Use to choose PDF compression for the media type that is most frequently sent to your Xerox device.
The device is capable of optimizing for mixed text and images, or for uniform text or images.

•

CCITT Group 4 (G4 MMR)

provides lossless compression. This format is widely supported, but

some document types may not compress significantly.

•

JBIG2

this compression is usually used for text and halftone documents. This compression format

requires Acrobat 5 with PDF version 1.4 or greater.

•

Flate Compression

used for bi-level or color images, or for general data. It is a lossless

compression format that combines LZ77 and adaptive Huffman encoding (RFC 1951).

•

MRC Compression

enables you to customize the compression that will be applied to images that

contain Mixed Raster Content.

Summary of Contents for WORKCENTRE 5790









































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands

Xerox WORKCENTRE 5790, User Manual

Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands