Xerox WORKCENTRE 5790, User Manual

Page: 181 / 328

Layout Adjustment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
E-mail
181
Original Size
Original Size allows you to specify automatic size detection of the originals, mixed size originals, or the
specific size of the image to be scanned. The options are:
• Auto Detect is the default setting and enables automatic size sensing. The size detected is
matched to a standard size paper.
• Preset Scan Areas allows you to define the size of your original from a list of preset, standard
original sizes. You can view the list by using the scroll bar.
• Custom Scan Areas is used to enter a specific area for
scanning. Measure the area to be scanned on the
original and enter the X and Y axis measurements into
the fields provided. Only the area specified is scanned.
• Mixed Size Originals allows you to scan documents
containing different size pages. The pages must be the
same width, like A4 LEF and A3 SEF (8.5x11” LEF and
11x17” SEF). Other combinations are shown on the
screen.
Select Save to save your selections and exit.
Edge Erase
Edge Erase enables you to specify how much of the image to erase around the edges of your
document. For example, you can remove the marks caused by punched holes or staples in your original.
The options are:
• All Edges is used to erase an equal amount from all
the edges. Use the arrow buttons to adjust the
amount to be erased from 1 mm to 50 mm (0.1” to
2.0”). All marks or defects within the measurement set
are deleted.
• Individual Edges enables an individual amount to be
erased from each of the edges.
Use the arrow buttons to adjust the amount for each
edge, from 0 mm to 50 mm (0” to 2.0”).
• Scan to Edge use this option to scan to the edge of the image.
Select Save to save your selections and exit.