Xerox WORKCENTRE 5790 User Manual Download Page 182

Page: 182 / 328

E-mail Options

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
E-mail

182

E-mail Options

The

E-mail Options

allow you to temporarily change the

format of the E-mail image file, set a

Reply To

address and

add a brief message. To access the

E-mail Options

, select

Services Home

and

E-mail

. Then select the

E-mail Options

tab.

File Name

This feature enables you to name the file that is sent by E-mail.

Using the keyboard, enter the name of the file.

•

Up to 50 alphanumeric characters can be entered.

•

To delete a character use the backspace key, or to
clear the entire entry select the

button.

•

Use the

Keyboards...

button to access additional

language keyboards.

Select

Save

to save your selections and exit.

File Format

The

File Format

determines the type of file created. You can select the file format you wish to use for

your scanned image. The options are:

•

PDF (Portable Document Format)

allows recipients

with the right software to view, print or edit the file, no
matter what their computer platform.

•

Image Only

optimizes the file for viewing and

printing and cannot be modified.

•

Searchable

runs the file through an

Optical

Character Recognition (OCR)

process. This can

take a few minutes but allows the text in the file
to be searchable and editable. If

Searchable

is selected, the

Document Language

becomes available. Select the appropriate language from the menu.

Depending on the receiving device, the

PDF

selection may not be compatible when the resolution

is set to

200 dpi

•

PDF/A

is an industry standard format for long term document preservation based on the PDF

format. The

Advanced Settings

may need checking to ensure they are appropriate for extended

use.

•

Image Only

optimizes the file for viewing and printing and cannot be modified.

•

Searchable

runs the file through an

Optical Character Recognition (OCR)

process. This can

take a few minutes but allows the text in the file to be searchable and editable. If

Searchable

is selected, the

Document Language

menu becomes available. Select the appropriate

language from the menu.

Summary of Contents for WORKCENTRE 5790









































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands

Xerox WORKCENTRE 5790, User Manual

Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands