Xerox WORKCENTRE 5790 User Manual Download Page 131

Page: 131 / 328

Layout Adjustment

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Workflow Scanning

131

Edge Erase

Edge Erase

enables you to specify how much of the image to erase around the edges of your

document. For example, you can remove the marks caused by punched holes or staples in your original.
The options are:

•

All Edges

is used to erase an equal amount from all

the edges. Use the

arrow

buttons to adjust the

amount to be erased from 1 mm to 50 mm (0.1” to
2.0”). All marks or defects within the measurement set
are deleted.

•

Individual Edges

enables an individual amount to be

erased from each of the edges, on both the first and
second sides.

Use the

arrow

buttons to adjust the amount for each edge, from 1 mm to 50 mm (0.1” to 2.0”).

•

Scan to Edge

use this option to scan to the edge of the image.

Select

Save

to save your selections and exit.

Summary of Contents for WORKCENTRE 5790









































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands

Xerox WORKCENTRE 5790, User Manual

Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands