Xerox WORKCENTRE 5790 User Manual Download Page 155

Page: 155 / 328

Paper/Output

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

155

Paper

This option displays information about the paper to use for the print job, such as size and type.

To change the paper to use for printing, select the Paper drop-down menu. The options are:

•

Other Size

select this option to display the

Paper Size

screen.

Select the paper size and scaling amount required.

•

Other Color

use this option to select a paper color for the print

job. Select a color from the drop-down menu. Use

Automatically Select

to enable the printer to select a paper

color.

•

Other Type

use this option to select a type of paper or media to

use for the print job. Use

Automatically Select

to enable the

printer to select a type.

•

Select by Tray

use this option to select a specific tray for

printing the job. The printer only uses the paper in the selected tray, even when more than one
tray contains the same paper size and type. Use

Automatically Select

to enable the printer to

select a tray loaded with the size and type of paper selected for the job.

Advanced Paper Selection

Select this option to display the

Advanced Paper Selection

screen. If

there is a bi-directional connection to the printer, the media loaded
in each of the trays is shown.

Select the paper tray, size, color and type to use for printing.

Pre-Cut Tab

is selected as the paper type, the image will be

shifted 13mm (0.5”) to the right automatically. Ensure the correct
tab sequence and number of tabs are loaded for the job.

Note:

For information about loading different media, refer to

Media Types

on page 233 of

Paper

and Media

Transparency Separators

Select this option to display the

Transparency Separators

screen. If

this option is selected, a blank or printed sheet is placed after each
transparency. The paper type for your job must be set to

Transparency

using the

Other Type

menu option.

•

Select

Blank Separators

Printed Separators

using the

eparator Options

drop-down menu.

•

Select the

Separator Color

Summary of Contents for WORKCENTRE 5790









































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands

Xerox WORKCENTRE 5790, User Manual

Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands