Xerox WORKCENTRE 5790 User Manual Download Page 308

Page: 308 / 328

Operational Safety Information

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Safety and Regulations

308

Maintenance Information

WARNING:

Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when

used on electromechanical equipment.

•

Any operator device maintenance procedures will be described in the user documentation
supplied with the device.

•

Do not carry out any maintenance on this device which is not described in the customer
documentation.

•

Use supplies and cleaning materials only as directed in the user documentation.

•

Do not remove covers or guards that are fastened with screws. There are no parts behind these
covers that you can maintain or service.

Consumables Information

•

Store all consumables in accordance with the instructions given on the package or container.

•

Keep all consumables away from the reach of children.

•

Never throw toner, toner cartridges or toner containers into an open flame.

Product Safety Certification

This device is certified by the following Agency using the Safety standards listed.

This device has been manufactured under a registered ISO9001 Quality system.

Agency

Standard

Underwriters Laboratories Inc.

UL60950-1 1st Edition (USA/Canada)

IEC/EN60950-1 2nd Edition

Summary of Contents for WORKCENTRE 5790









































































































































































































































































































































Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands

Xerox WORKCENTRE 5790, User Manual

Search results

Summary of Contents for WORKCENTRE 5790

Reviews:

Related manuals for WORKCENTRE 5790

Brands by name

Popular brands