Selecting Printing Options
20
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the
driver settings before sending the job to the printer. For example, if you want
to print two copies of a document, select this setting in the driver before
printing that job.
1
With the desired document or graphic open in your application, access
the Print dialog box.
2
Select the Phaser 6120 printer and click its
Properties
button to open the
printer driver.
3
Make selections from the driver tabs.
4
Click the
OK
button to save your selections.
5
Print the job.
Printing Options for the PostScript and PCL Printer Driver
"
When using the Phaser 6120 PCL6 printer driver on Windows Me/
98SE, a tab for specifying printer settings appears on the dialog box.
For details about using the Phaser 6120 PPD on Windows Me/98SE,
see “Printing Options for the Windows Me/98SE PostScript File” on
page 23.
Saved Settings
Saved settings enable you to save customized settings to be used later. This
setting is available on the Basic, Layout, Cover Page, Overlay, Watermark,
and Quality tabs
Advanced Tab (PostScript Printer Driver Only)
The Advanced Tab allows you to
Specify the PostScript output method
Specify whether or not the error messages of a print job are printed
Print a mirror image
Summary of Contents for Phaser 6120
