Xerox Phaser 6120 User Manual Download Page 49

Page: 49 / 174

About the Control Panel

SERVICE MENU

With this menu, the service representative can adjust the printer and perform
maintenance operations. This menu cannot be used by the user.

FORMAT

FLASH

Settings

/YES

Select whether or not to initialize the flash RAM.

YES

is selected, the flash RAM is initialized.

FORMAT

DISK

Settings

/YES

Select whether or not to initialize the hard disk.

YES

is selected, the hard disk is initialized.

RESTORE /

SAVE

RESTORE

FACTORY

Settings

/YES

Select whether or not all menu items are reset to their
initial settings.

YES

is selected, all menu items are reset to their

initial settings.

SAVE

CUSTOM

Settings

/YES

Select whether or not all changed menu settings are
saved.

YES

is selected, all changes are saved.

RESTORE

CUSTOM

Settings

/YES

Select whether or not menu items are reverted to the
previously saved settings.

YES

is selected, the menu items revert to the

previously saved settings.

Summary of Contents for Phaser 6120















































































































































































Search results

Summary of Contents for Phaser 6120

Reviews:

Related manuals for Phaser 6120

Brands by name

Popular brands

Xerox Phaser 6120, User Manual

Search results

Summary of Contents for Phaser 6120

Reviews:

Related manuals for Phaser 6120

Brands by name

Popular brands