Xerox Phaser 6120 User Manual Download Page 136

Page: 136 / 174

Status, Error, and Service Messages

129

Error Messages (Warning)

This message...

means...

do this...

CANNOT ROTATE

CARTRIDGE

A problem occurred,
such as a paper jam, that
prevents the toner
cartridge carousel from
rotating.

If a paper jam occurred,
clear the jammed paper.

DISK NEAR FULL

The optional hard disk is
full.

Delete print jobs saved
on the hard disk.

EMPTY

The

toner cartridge is

empty.

This message appears
when the

QUALITY/

TONER OUT ACTION

menu is set

CONTINUE

Replace the toner
cartridge.

X INCORRECT

The specified toner
cartridge is not the
correct toner for this
printer.

Replace the specified
toner with the Xerox-
approved toner for this
printer.

PAPER TYPE MISMATCH

The media type set in the
printer driver is different
from the type of media
loaded.

Load the correct paper
type.

IMAGING UNIT LOW

The imaging unit is near
the end of its life.

Replace the imaging unit
soon. Be sure to have
an imaging unit on hand.

REPLACE IMAGING UNIT

The imaging unit has
reached the end of its
life.

Replace the imaging
unit.

Summary of Contents for Phaser 6120















































































































































































Search results

Summary of Contents for Phaser 6120

Reviews:

Related manuals for Phaser 6120

Brands by name

Popular brands

Xerox Phaser 6120, User Manual

Search results

Summary of Contents for Phaser 6120

Reviews:

Related manuals for Phaser 6120

Brands by name

Popular brands