Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
85
h.
Check the
[Enabled]
checkbox to enable
[Dynamic DNS Registration (DDNS)]
.
Note:
If your DNS Server does not support dynamic updates there is no need to enable DDNS.
9.
In the
DHCP/DDNS
area, check the
[Enabled]
checkbox for
Release Registration
ONLY if you
wish to release this device's IP address upon reboot. Default is unchecked.
10. In the
Zero-Configuration Networking
area:
a.
Check the
[Enabled]
checkbox for
Self Assigned Address
, to support communicating with
other devices using 169.254/16 IPv4 addressing, over the same physical or logical link (such
as in ad hoc, or isolated (non- DHCP) networks). Refer to the IETF website for zeroconf details.
b.
Check the
[Enabled]
checkbox for
Multicast DNS
to resolve host names to IPv4 addresses
without using a conventional DNS server.
11. Click on the
[Apply]
button to accept changes or
[Undo]
to return the settings to their previous
value.
12. Click on the
[OK]
button when you see the message
“Properties have been successfully
modified”
.
Note:
Changing the device IP Address will impact other protocols: NetBIOS/IP, LPR/LPD, FTP,
SNMP and Raw TCP/IP Printing. These protocols will need to reference the new IP Address.
Disabling TCP/IP will impact other protocols: NetBIOS/IP, LPR/LPD, FTP, SNMP and Raw TCP/IP
Printing. This web user interface will be disabled until TCP/IP is re-enabled from the local user
interface.
Supporting LPR Printing
1.
At your Workstation, open the web browser and enter the
IP address
of the device in the Address
bar, and press
[Enter]
.
2.
Click on the
[Properties]
tab.
3.
If prompted, enter the Administrator User ID and Password. The default is
[admin]
and
[1111]
.
4.
Click on the
[Login]
button.
5.
Click on the
[Connectivity]
link.
6.
Click on the
[Protocols]
link.
7.
Select
[LPR/LPD]
in the directory tree.
8.
In the
General
area:
a.
For
Protocol
, check the
[Enabled]
checkbox to enable LPR/LPD.
Note:
Disabling LPR/LPD will affect clients printing to the device over TCP/IP using the LPR printing
port.
b.
Physical Connection
displays the physical network connection, this will always display
“Ethernet”
.
c.
In the
Port Number
, enter an LPR/LPD port number. The default is 515.
9.
In the
Advanced Settings
area:
a.
Check the
[Enabled]
checkbox to enable
PDL Switching
. PDL switching allows the device to
process print jobs which contain two or more printer languages, for example: PCL and
PostScript, or ASCII and PostScript.
Summary of Contents for ColorQube 9201
