General Setup
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
38
2.
Click on the
[Status]
tab.
3.
Select
[SMart eSolutions]
in the directory tree.
4.
Click on the
[Maintenance Assistant]
tab.
5.
Click on the
[Start an Online Troubleshooting Session at www.xerox.com]
bar. A
“Starting
Online Troubleshooting Session”
message will display. When transmission is complete your
browser will automatically be redirected to Xerox.com for online assistant.
Note:
If there are any communication problems, a message window will display. Check your
configuration and communication settings by clicking the
[Settings]
button. This will take you to
the
SMart eSolution Setup
page.
To Download File to Your Workstation:
1.
At your Workstation, open the Web browser and enter the
IP address
of the device in the Address
bar, and press
[Enter]
.
2.
Click on the
[Status]
tab.
3.
Select
[SMart eSolutions]
in the directory tree.
4.
Click on the
[Maintenance Assistant]
tab.
5.
Click on the
[Download File to Your Computer]
bar. The
Generating Diagnostic Information
screen will display, showing “This may take a few minutes”.
6.
Once the file is ready,
File Ready
screen will display, indicating
“File Successfully generated”
.
Right-click on the link
[UsageLog.csv]
to download the file.
7.
Select
[Save Target As...]
.
8.
Select the folder you want to save the file in and click on
[Save]
.
9.
Click on the
[Close]
button.
Note:
If there are any communication problems, a message window will display. Check your
configuration and communication settings by clicking the
[Settings]
button. This will take you to
the
SMart eSolution Setup
page.
Energy Saver
This feature allows you to set the device to save energy when not in use. This feature can be set at the
device as well as at the web browser.
At your Workstation:
1.
Open the web browser and enter the
IP address
of the device in the Address bar, and press
[Enter]
.
2.
Click on the
[Properties]
tab.
3.
If prompted, enter the Administrator User ID and Password. The default is
[admin]
and
[1111]
.
4.
Click on the
[Login]
button.
5.
Click on the
[General Setup]
link.
6.
Click on
[Energy Saver]
in the directory tree.
7.
In the
Energy Saver Mode
area, select one of the following mode for
[Energy Saver Mode]
:
•
Intelligent Ready
- the device wakes up and sleeps automatically based on previous usage.
•
Job Activated
- the device wakes up when an activity is detected.
Summary of Contents for ColorQube 9201
