Workflow Scanning
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
198
4.
Enter details in the
[Login Name]
,
[Password]
and
[Retype Password]
field, if the system will be
directly accessing the file server.
Note:
A Login (account) Name and (server) Password for the system to access the remote server.
This is mandatory for use with a SMARTsend server. For information on creating accounts on the
SMARTsend server, refer to the FreeFlow SMARTsend Installation and Administration Guide. Note
that these accounts directly support the Login Source settings, accessed by clicking General under
Workflow Scanning in Internet Services.
5.
Check the
[Select to save new password]
checkbox if you need to change the password for an
existing Login Name.
6.
Click on the
[Apply]
button to accept the changes.
7.
Click on the
[OK]
button when you see the message
“Properties have been successfully
modified”
.
SMB
1.
From the
Template Pool Setup
screen, in the
Settings
area, select
[SMB]
from the
Protocol
drop-
down menu.
2.
Select either the
[IPv4 Address]
or
[Host Name]
.
3.
Enter the
[IP Address]
and
[Port]
or
[Host Name]
and
[Port]
of the SMB server in the
[Template
Pool Server]
field.
4.
Enter the SMB share name in the
[Share]
field.
5.
Type in the path to the location of the scan folder in
[Document Path]
. Enter the full path to the
directory, starting at the root of FTP services, for example:
/(directory name)/(directory name)
.
6.
For
Login Credentials to Access the Destination
, select
[System]
to have the system directly log
in to the file server.
7.
Enter details in the
[Login Name]
,
[Password]
and
[Retype Password]
field, if the system will be
directly accessing the file server.
Note:
A Login (account) Name and (server) Password for the system to access the remote server.
This is mandatory for use with a SMARTsend server. For information on creating accounts on the
SMARTsend server, refer to the FreeFlow SMARTsend Installation and Administration Guide. Note
that these accounts directly support the Login Source settings, accessed by clicking General under
Workflow Scanning in Internet Services.
8.
Check the
[Select to save new password]
checkbox if you need to change the password for an
existing Login Name.
9.
Click on the
[Apply]
button to accept the changes or
[Undo]
to return the settings to their
previous values.
10. Click on the
[OK]
button when you see the message
“Properties have been successfully
modified”
.
HTTP or HTTPS
1.
From the
Template Pool Setup
screen, in the
Settings
area, select
[HTTP]
or
[HTTPS]
from the
Protocol
drop-down menu.
2.
Select either the
[IPv4 Address]
,
[IPv6 Address]
or
[Host Name]
.
Summary of Contents for ColorQube 9201
