Xerox ColorQube 9201, System Administrator Manual

Page: 135 / 336

Authentication
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
127
12. To Set Authentication to control access to individual Services:
a. In the Current Configuration area, click on the [View] button for Service Registration .
b. On the Service Registration screen, check the checkbox to select the services you want to
display on the machine touch interface.
c. Click on the [Save] button and return to the Authentication Configuration .
13. To Set Authentication to control access to individual Features:
a. Select [Tools & Feature Access] in the directory tree under Access Right .
b. In the Tools & Feature Access page, under Presets , select either:
• Standard Access - Only Lock Tools
• Open Access - Unlock All Tools and Features
• Custom Access
If you select [Custom Access] , for each Pathways and services within the pathway you can select
either [Unlocked] or [Locked] from the drop-down menu. For certain Services within the Service
Pathway you can also select [Hidden] .
14. Click on the [Apply] button, then click on the [OK] button when you see the message “Properties
have been successfully modified” .
15. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator,
and click on the [Logout] button.
Authentication Configuration for SMB (Windows NT4) and SMB (Windows
2000/2003)
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter] .
2. Click the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111] .
4. Click on the [Login] button.
5. Click on the [Security] link.
6. Click on the [Access Rights] link.
7. Select [Setup] in the directory tree.
8. The Authentication Configuration page is displayed, in the Current Configuration area click on
the [Edit Methods] button for Authentication .
9. In the Where is the Information Located? area select [Remotely on the Network] from the
drop-down menu for Device User Interface Authentication , and click on the [Save] button to
return to the Authentication Configuration page.
10. In the Current Configuration area, click on the [Configure] button for Authentication Server .
11. In the Authentication Server page:
a. Select [SMB (Windows 2000/2003)] or [SMB (Windows NT4) from the Authentication
Type drop-down menu.
b. In the Configuration (Required) area, enter details in the [Default Domain] field.
c. Check the Optional Information checkbox.
d. Select either [IPv4 Address] or [Host Name] radio button.
e. If IPv4 Address is selected, enter the [IP Address] and [Port] details in the required fields.