Xante Accel a Writer 812, Manual

Page: 90 / 312

4-10 PC Setup bb __________________________________________
The new driver is installed. Before you can select the Accel-a-Writer
812 in your Windows applications using this driver, you need to set
up the driver; skip to “Setting up the Driver for Windows 3.1, 3.11,
or 95” later in this chapter.
Installing the Windows 95 Driver
Before you begin installation, be sure to check the Readme file for
the Adobe PostScript Printer Driver for Windows. This file is in the
Windows Write format and contains any updates to the driver’s
documentation.
Use the following procedure to install the Adobe Windows driver for
Windows 95.
1. Open Windows.
2. Make sure all programs in Windows are closed and all
spooling programs are inactive.
3. Insert the XANTÉ Windows 95 Driver disk into your floppy
disk drive A or B.
4. Click START.
5. Click RUN.
6. Click OK. Setup will begin and a message will appear asking
if you want to read the readme file or skip it.
7. Click SKIP.
8. Click CONTINUE. After the files copy, a message appears
asking if you want to restart Windows.
9. Click OK and wait for Windows to restart.
10. Click START.
11. Click SETTINGS.