Xante Accel a Writer 812, Manual

Page: 243 / 312

10-24 Troubleshooting bb ____________________________________
§ When downloading a font or PostScript file using System 7, the
Macintosh displays the message, “Looking for LaserWriter...”
and then “Cannot find printer on chooser.” displays.
∞
Possible Solutions:
• Open the System Folder and view by icon.
• Open the Extensions folder and view by icon.
• Drag the LaserWriter driver out of the Extensions
folder and into the System Folder.
• Remove any LaserPrep files from the System and
Extensions folders.
• Turn both your Macintosh and printer off and then
back on again.
• Select the Chooser from the Apple menu, make sure
LocalTalk is active, and select the Accel-a-Writer
812 printer.
• If you have an Ethernet setup, select Control Panels
from the Apple menu; then select Network and make
sure Ethernet is selected.
• Continue printing as usual.
§ The Accel-a-Writer 812 does not show up on the Chooser.
∞
Possible Solutions:
• Check for proper termination on all LocalTalk
cables and boxes. See “Connecting in a Macintosh
Environment” in chapter 2 for details.
• If you have an Ethernet setup, make sure all Ethernet
cabling is connected correctly. See your network
documentation for details.
• Make sure the interface is enabled.
• Disable all background printing and print spoolers.
• Try a new cable between your Macintosh host and
printer.