Xante Accel a Writer 812, Manual

Page: 148 / 312

___________________________________ Routine Operations 6-23
Use the following procedure to change density settings. This
example selects a value of 9.
1. Make sure the printer is on and idle.
2. Press the Menu
→
key until SETUP:MISC (the Miscellaneous
menu) appears in the display window.
3. Press the Enter
↓
key to enter the Miscellaneous menu.
4. Press the Menu
→
key until MISC:DENSITY appears in the
display window.
5. Press the Enter
↓
key to enter the Density menu.
6. Press the Menu
→
key until density:9 appears, if necessary. If
DENSITY is capitalized, then 9 is already the default density
setting; skip to step 8.
7. Press the Enter
↓
key to select density:9. The selection changes
to all capital letters, DENSITY:9, in the display window.
8. Press the On Line key. READY/IDLE appears in the display
window.
The printer now has 9 selected as the density setting.
Handling and
Replacing the Toner Cartridge
Your Accel-a-Writer 812 uses a standard EP-E toner cartridge. This
handy one-piece cartridge combines the toner, the drum, the
developer assembly, and the main charging roller so you only have
to replace one consumable that averages 6000 letter/A4 size copies at
4% coverage.