Xante Accel a Writer 812, Manual

Page: 79 / 312

_____________________________________ Macintosh Setup 3-13
3. Choose Screen to see the list of fonts on the screen. The Font
Directory screen appears.
Note: If you select Printer, only the fonts loaded in memory
(not ROM) print.
4. Select Memory from the Device options to see a list of fonts
stored in memory, or select Rom to see the fonts stored in
ROM.
5. Click OK.
6. Choose Quit from the File menu.
Setting the Margins
On rare occasions, the printable area of a new Accel-a-Writer 812
needs to be adjusted. If this is the case for your printer, you can make
the minor adjustments using the XANTÉ Command Center’s Align
Paper… feature in the Printer menu.
Printer margins refer to the imageable area of the page, not to the
margin settings in an application. You must always align the printer
margins after using XANTÉ Accurate Calibration Technology
(X•ACT). See “Accurate Calibration Technology” in chapter 7 for
details.
Turning the Start-up Page Off or On
The printer’s factory default setting is to print the start-up page
whenever the printer is turned on. You can save printer start-up time,
paper, and toner by not printing this page. However, if you disable
this feature, be sure to save a reference copy.
Note: If you want an occasional start-up page, press the On Line
key to take the printer off line. Then, press the Test
←
key.