Xante Accel a Writer 812, Manual

Page: 214 / 312

____________________________________________ Options 9-17
9. Locate the RAM banks on the controller board (fig. 9.12).
Bank 1
Bank 2
Fig. 9.12 Locate the Controller Board RAM Banks
10. Install the RAM upgrade using the following procedure.
Note: RAM banks must be filled in order, Bank 1 and then
Bank 2. If you mix SIMM RAM sizes, the larger size
SIMM goes into Bank 1 and the smaller in Bank 2.
a. If Bank 2 is open and the upgrade SIMM is the same
size or smaller than the SIMM in Bank 1, skip to step d.
b. Use your thumbs to pull open the two latches on the
bank, one on each end (fig. 9.13).