manualshive.com logo in svg

Xante Accel a Writer 812, Manual

Share
Download
Xante Accel a Writer 812 Manual Download Page 191

8-6  Maintenance

bb

_______________________________________

2.

Wipe the exterior with a soft, lint-free, clean cloth dampened
with a neutral (without abrasives, ammonia, or chlorine)
detergent.

Caution:

Never use ammonia-based cleaners on or around
the printer. This may cause permanent damage to
the toner cartridge or to the printer’s case. Also,
never spray or pour solutions directly on the
printer. Always put the solution on the cloth and
wipe the printer with the cloth. Make sure the
solution does not get inside the printer, ports, air
vents, or power cord areas.

3.

Wipe the printer dry with a clean, dry, lint-free cloth.

4.

Give the printer a few minutes for any damp areas to dry
thoroughly.

5.

Reconnect any interface cables and the power cord.

Cleaning the Anti-Static Teeth

You should clean the anti-static teeth when you change the toner
cartridge or if paper jams frequently occur.

1.

Turn the printer off.

Summary of Contents for Accel a Writer 812

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands