Xante Accel a Writer 812, Manual

Page: 85 / 312

___________________________________________ PC Setup 4-5
XTAW8121.PPD is a PostScript printer description file which
provides printer-specific information for use by some applications.
See the README.1ST file for instructions on installing this PPD file
for PageMaker.
If you need assistance working with this file, contact XANTÉ. See
“Calling for Technical Support” in chapter 10 for details.
PS_FILES Directory
This directory contains PostScript files for setting a TCP/IP address,
turning the start-up page off and on, checking system parameters,
and sending a PostScript end-of-file marker. Read the descriptions of
all the files in this directory to determine which files to load to your
system.
To load some or all of these files, use the following procedure to
make a directory on your hard disk for the PostScript files and to
copy the file(s) from the utilities disk.
1. Turn on your PC and go to the DOS prompt.
2. Go to the root directory by typing:
CD \
↵
3. Type the following to create a PS_FILES directory:
MD PS_FILES
↵
4. Place the utilities disk in drive A and copy the desired
PostScript file(s) to the new PS_FILES directory.
Type the following command exactly as it is shown to load all
the PS_FILES directory files, or substitute the name of the
desired file for the *.* to load only that file.
COPY A:\PS_FILES\
*.* C:\PS_FILES
↵