Xante Accel a Writer 812, Manual

Page: 118 / 312

5-20 Configuration bb ______________________________________
I/F:
XXXX
ENTER
TEST MENU
XXXX: ENABLE
ENABLE: YES
enable: no
XXXX: MODE
MODE: PS STD
mode: hpgl
mode: pcl5
mode: ais
Fig. 5.6 The Parallel, LocalTalk, EtherTalk, and LinePrinter Menus
Note: The XXXX in figure 5.6 will be replaced by the specific
interface menu chosen.
The Enable Menu
The Enable menu, XXXX:ENABLE, allows you to enable (YES) or
to disable (NO) the parallel, LocalTalk, or Ethernet interfaces on
your printer. The XXXX will be replaced by the specific interface
menu chosen, either PARALLEL, LTALK, ETALK or LPR. The
factory default is YES.
The Mode Menu
The Mode menu, XXXX:MODE, allows you to select PostScript, an
emulation mode (HP-GL or PCL5), or automatic switching between
modes. The XXXX will be replaced by the specific interface menu
chosen, either PARALLEL, LTALK, ETALK or LPR. The mode
options are PS STD, HPGL, PCL5, and either AIS or AIS RAW. The
AIS options switch between PostScript and PCL5. The factory
default is PS STD.