Xante Accel a Writer 812, Manual

Page: 273 / 312

B-10 Application Notes bb ___________________________________
8. Select the port the printer is connected to, serial or parallel.
9. Enter the address of the port you selected or press the Enter
key if there is no change.
10. Check over your device location, and if you are satisfied, press
the Enter key for no changes. The question “Do you want to
change anything?” appears.
11. Check over the list for all the selections. If you want to make
changes, type YES and press the Enter key; then make the
desired changes. If not, type NO, press the Enter key. The
message “Enter a description for the plotter:” appears.
12. Enter the name you would like for the printer to have (such as
AW812).
13. Select Exit to the Configure menu.
At this point you have configured AutoCAD to print from your
Accel-a-Writer 812 printer.
Printing from AutoCAD 12
After you configure AutoCAD to print from your printer, use the
following procedure to print from AutoCAD.
1. Open your AutoCAD program.