manualshive.com logo in svg

Xante Accel a Writer 812, Manual

Share
Download
Xante Accel a Writer 812 Manual Download Page 154

___________________________________  Routine Operations  6-29

3.

Holding the cartridge with both hands, align and slide the
cartridge into the printer until it rests securely in place (fig.
6.14). If the toner cartridge is not seated in place, the top cover
will not close.

ONLINE

FORM FEED

TRAY SELECT

ENTER

MENU

RESET

TEST

DATA

MANUAL

READY

Fig. 6.14  Load the Toner Cartridge

4.

Close the printer’s top cover until it snaps into place.

Caution:

Never move or ship the printer with a toner
cartridge installed. Toner spills can damage the
printer.

Remember that a new cartridge has a break-in period (see “Handling
and Replacing the Toner Cartridge” earlier in this chapter for
details).

Summary of Contents for Accel a Writer 812

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands