Xante Accel a Writer 812, Manual

Page: 83 / 312

___________________________________________ PC Setup 4-3
Introduction
This chapter covers setting up your Accel-a-Writer 812 to print in a
PC environment. This includes installing the XANTÉ Utilities and
Command Center, printing from Microsoft Windows, downloading
printer fonts, setting margins, and controlling start-up page printing.
Before You Begin
You should be familiar with standard PC keyboard and mouse (if
applicable) procedures such as choosing commands, selecting
options, using buttons and boxes, locating files, and scrolling. If you
have questions on any of these procedures, see your DOS and mouse
documentation.
Once your Accel-a-Writer 812 is installed, check the README.1ST
file in the root directory of the XANTÉ Utilities disk for the PC.
Any updates on the printer, the utilities software, or this manual will
be covered in this file. It also may have information on new options
if any became available after this manual was printed.
Installing the XANTÉ Utilities (PC)
Your Accel-a-Writer 812 package includes a XANTÉ Utilities disk
for the PC. This disk contains printer specific drivers, programs, and
PostScript files to help you set up, customize, and troubleshoot your
printer in a PC environment.
Note: If your PC only supports the 5.25" disks, call XANTÉ at
800-926-8393 in the US or Canada, at 95-800-926-8393 in
Mexico, or at 334-342-4846 from other countries for a copy
of the utilities on a 5.25" disk.
This section gives you a brief description of the utilities. For details
on using the utilities, check the Index and Table of Contents for the
specific utilities.