manualshive.com logo in svg

Xante Accel a Writer 812, Manual

Share
Download
Xante Accel a Writer 812 Manual Download Page 2

ii

bb

____________________________________________________

Trademarks

XANTÉ

®

 and Accel-a-Writer

®

 are registered trademarks of XANTÉ

Corporation. X•ACT™ is a trademark of XANTÉ Corporation.

Adobe Illustrator

®

 is a registered trademark of Adobe Systems Incorporated,

registered in the United States Patent and Trademark Office. Adobe™,
PostScript™, PageMaker™, Adobe Separator™, PrePrint™, and Adobe
Photoshop™ are trademarks of Adobe Systems Incorporated which may be
registered in certain jurisdictions. Aldus

®

 is a registered trademark of Aldus

Corporation, registered in the United States Patent and Trademark Office.
Apple

®

, AppleTalk

®

, EtherTalk

®

, LaserWriter

®

, and Macintosh

®

 are

registered trademarks of Apple Computer, Inc., registered in the United
States Patent and Trademark Office. LocalTalk™ is a trademark of Apple
Computer, Inc. AutoCAD

®

 is a registered trademark of Autodesk, Inc.,

registered in the United States Patent and Trademark Office.

Centronics

®

 is a registered trademark of Centronics Data Computer

Corporation, registered in the United States Patent and Trademark Office.

Hewlett-Packard

®

, HP

®

, LaserJet

®

, HP PCL

®

, and HP-GL

®

 are registered

trademarks of Hewlett-Packard, Co., registered in the United States Patent
and Trademark Office.

Intel

®

 is a registered trademark of Intel Corporation registered in the United

States Patent and Trademark Office. ITC Avante Garde Gothic

®

, ITC

Bookman

®

, ITC Zapf Chancery

®

, and ITC Zapf Dingbats

®

 are registered

trademarks of International Typeface Corporation, registered in the United
States Patent and Trademark Office and some foreign countries. ITC
typefaces are copyrighted © by the International Typeface Corporation.

Helvetica

®

, Palatino

®

, New Century Schoolbook

®

, and Times

®

 are

registered trademarks of Linotype AG and/or its subsidiaries, registered in
the United States Patent and Trademark Office.

FreeHand™ is a trademark of Micromedia, Inc. Microsoft

®

 is a registered

trademark of Microsoft Corporation, registered in the United States Patent
and Trademark Office. Windows™ is a trademark of Microsoft
Corporation.

QuarkXPress

®

 is a registered trademark of Quark, Inc. registered in the

United States Patent and Trademark Office.

Summary of Contents for Accel a Writer 812

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands