manualshive.com logo in svg

Wilan Hopper Plus 120-24, Installation And Configuration Manual

Share
Download
Wilan Hopper Plus 120-24 Installation And Configuration Manual Download Page 73

Configuration

66

Version 1.0 Rev B - 08/00

Link Monitor Display

Viewing Link Monitor Statistics

Link performance statistics such as power and bit error rate can be viewed while the link 
monitor is running. Statistics are only available on the unit running the link monitor. The 
window is view only.

To view link monitor statistics

1.

From the Main Menu, select 

Link Monitor Display

. The RF Background Link 

Monitor Statistics window is displayed.

where

Link Monitor Rank

When viewed on the base unit, the rank of the 
remote unit whose link is being tested. When 
viewed on the remote unit, this field is zero.

Base to Remote BER

The bit error rate from the base to the remote. 
Displays “N/A” when the link monitor is not 
running.

Remote to Base BER

The bit error rate from the remote to the base. 
Displays “N/A” when the link monitor is not 
running.

Missed Packet Count

The number of missed packets.

Base to Remote Env 
Power

Envelope power received at the remote.

Base to Remote Corr 
Power

Correlation power received at the remote.

Remote to Base Env 
Power

Envelope power received at the base.

Remote to Base Corr 
Power

Correlation power received at the base.

                      RF Background Link Monitor Statistics

    Link Monitor Rank                    0

    Base to Remote BER                     N/A

    Remote to Base BER                     N/A

    Missed Packet Count                  0

    Base to Remote Env Power             0

    Base to Remote Corr Power            0

    Remote to Base Env Power             0

    Remote to Base Corr Power            0

Summary of Contents for Hopper Plus 120-24






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands