Configuration
52
Version 1.0 Rev B - 08/00
Setting Remote Unit RF Group
Remote unit RF group controls how remote units communicate with each other. Only
remote units in the same non-zero RF group can communicate directly with each other. A
remote with a zero RF group can only communicate with the base unit.
To set remote unit RF group
1.
From the Main Menu, select
RF Module Configuration
.
The Radio Module
Configuration window is displayed.
2.
Select
Remote Unit RF Group
.
3.
In the Remote Unit RF Group entry field, type the RF group number, using the
following table as a guide.
4.
Press
Enter
.
RF Group
Remote Characteristics
0
Closed: remote will only transmit to and receive from the base unit.
1-63
Open: remote will transmit to and receive from the base and all
remotes with the same RF group number.
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency 2.4400 GHz 2.4400 GHz 2.4400 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 1 1 1
Config Test Minutes (1-120) 30 30 30
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) -> 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute
